FOSHAN MUWood Composite Material Co., Ltd. is located in the "South gate of China, South China Sea shipping hub "Guangdong land transport and maritime advantages of Foshan; The company has advanced research and development team and management team,
Our annual output reaches 1.5 million square meters, the production workshop covers 10,000 square meters, the outdoor hardened floor covers 4,000 square meters, and the office building covers 1,200 square meters. It has 30 domestic advanced extrusion production lines, 5 sets of 75 high-twist and high-yield granulator, equipped with fully automatic feeding and discharging system.We are committed to providing customers with stable quality, reliable, affordable, rapid delivery of wood-plastic products.
We sincerely invite dealers and customers from all over the world to visit the site and cooperate with us to jointly explore the market and create a better future.
We are committed to providing quality products and services, and work together with you to achieve a win-win situation.
1, plastic wood can be used ordinary woodworking machinery to do sawing, drilling and other work.
2, use the expansion tube to fix the plastic wood keel on the floor, keel spacing 350-380 mm, pay attention to the screw cap can not be higher than the surface of the wooden keel, keep the overall smooth.
3, the application of self-tapping screws between plastic wood fastening work,outdoor generally use stainless steel self-tapping screws, and plastic wood and steel plate generally use self-drilling self-tapping screws.
4, before fastening with self-tapping screws, pre-drilling is necessary.The diameter of the normal pre-drilling hole is about 3/4 of the diameter of the screw.5, plastic wood profile and keel around each with a screw.
·Although plastic wood floors are generally designed with buckles, special attention should also be paid to the construction requirements of good foundations.
It is necessary to strictly follow the construction plan to carry out the later installation,so that the floor construction is reliable, and the later use of the floor is also guaranteed.
.So what should we pay attention to in the specific construction? Before the preparation of the construction, we must do a good job of the site confirmation, pay attention to the construction site of the concrete base ground level, if there is a problem or is not dry, then it is still necessary to post-treatment, and then to lay the floor.
. If it is grass, the steel frame made of galvanized steel pipe should be laid on the grass to fix the keel. You can directly use the expansion tube to fix the keel, so that the later installation of plastic wood flooring will be much more stable.
·Generally fixed point spacing is about 30-40CM, should not exceed 50cm, steel pipe at least40*20*2mm, or 40*4050*50, the larger the cost is higher, the better the quality of attention to drainage generally keel center distance to about 30-40CM, keel end of the joint should also have about 1CM spacing, Only in this way can it be conducive to the later drainage.
. Try to do the overall design, and then go to the floor construction. If the environment of the construction site is relatively poor, especially the construction conditions of the basic ground are not good, then try to use the steel keel, so that the later installation of plastic wood flooring can also ensure stability. Try to use galvanized steel, and the node is brushed with anti-rust paint, which can ensure corrosion resistance and service life
FOSHAN MUWood Composite Material Co., Ltd. is located in the "South gate of China, South China Sea shipping hub "Guangdong land transport and maritime advantages of Foshan; The company has advanced research and development team and management team,
Our annual output reaches 1.5 million square meters, the production workshop covers 10,000 square meters, the outdoor hardened floor covers 4,000 square meters, and the office building covers 1,200 square meters. It has 30 domestic advanced extrusion production lines, 5 sets of 75 high-twist and high-yield granulator, equipped with fully automatic feeding and discharging system.We are committed to providing customers with stable quality, reliable, affordable, rapid delivery of wood-plastic products.
We sincerely invite dealers and customers from all over the world to visit the site and cooperate with us to jointly explore the market and create a better future.
We are committed to providing quality products and services, and work together with you to achieve a win-win situation.
Our team is dedicated and committed to the challenging journey ahead. With a shared sense of responsibility and a unified mission, we will infuse our personal values into the company's long-term development, paving the way for a promising future
